Thursday, June 14, 2012

The winner of my WYEGW is......


Kathy Salido!!  Kathy said...

Sharon,
Your card is so cute just the way it is!! I love the colors your chose and the added sparkle. The only thing I might add is some ribbon at the top, but it does not really need it!!
Kathy
My Cricut Craft Room Design Team

Thank you all for your wonderful comments and suggestions.   Here 
is one more look at Michaela's card. It is hard to believe that I have
a High School student in our house hold now.  


Sweet Wishes ~Sharon~

Wednesday, June 13, 2012

For today's challenge I decided to combine the 2 themes 
and make a card with Shiny Elements and Would You
 Ever Guess Wednesday.  (For WYEGW you have to use 
a Cricut cut that is not a main cut.) 

As you know from my last posting my daughter Michaela 
is leaving Middle School and is on to High School. In our 
School District we only have one High School and it is 
HUGE.  The graduating class this year is around 650. I 
am a little nervous for her but, I know her and she will fit 
is just fine. My daughter is no wall flower and fits right into 
any situation. Since she is not actually graduating I decided 
not to use the "Congratulations Graduate"words that can be 
found on some cartridges. 
For this card I used 3 Cricut cartridges. The card base was cut from 
the Art Philosophy Cricut cart by Close to My Heart. I used the fit 
to page button with a 12 X 12 piece of DCWV paper. This cut can
 be found on page 54. It ends up being 5 1/2 X 9 inches. The 2012
 also came from the Art Philosophy cartridge and was cut using the
Font and Font layer buttons.  I love the little holes that are cut in the
numbers because it makes a perfect place to add some stickles for a 
little extra bling. The 2012 were cut out 2 times with each button at 
1 1/2 inches. The background paper is cut at 7 3/4 X 4 1/2 inches.
  I used some of my scrap paper but, I know this was from an old 
Colorbok stack. 

The second cartridge I used was Wrap it Up for the cap. You can find
 the cap on page 67. I cut each layer out 3 times at 2 inches. (That 
may seem small but the size is not by length but hight) I then
 glued each layer together to give it thickness. 

The last cartridge used is 3 Birds on Parade.  I know funny hun.. a 
cartridge that is all about really cute birds. How can that be used on 
a graduation card?  Well since I didn't actually want "Congratulations 
Graduate" this cartridge has "Way to Go" and I thought "how perfect"
You can find the "Way to Go" cut on page 51 in the phrase section.
I cut it out at 2 inches 2 times for each layer. Once again for 
thickness. I love to have my elements on my cards be thick 
and popped up with a little bit of sparkle. 
As you can see in my second picture I pop dotted all of the cuts to 
give them the lift they need to stand out. After everything was stuck
down in just the right places I added little dots of Crystal colored 
Stickles.  Doesn't that give the card a little extra something. 

I hope you enjoyed seeing my "Way to Go" card today. Now I 
invite you to go over to My Cricut Craft Room and see what other
wonderful projects my Design Team Sisters have created for todays
challenge.  I love to give away Blog Candy!!  So, for today I will be
choosing ONE special person to receive a surprise Blog Candy prize
from me.  Please let me a comment with your contact information 
and one way you think I could make my card better.  I will be
choosing the winner on June 13th (Which is Michaela's special day)

Have a fantastic Wednesday!!


Sweet Wishes ~Sharon~


Thursday, May 31, 2012

Welcome to the It's a Wrap Birthday Blog Hop
featuring the Thankful Thursday Design Team.
Hopefully you just came from the talented Kim.
If not please head on over to see our hop hostess
Jenny so you can start from the beginning. I wouldn't
want you to miss out on the fantastic project for today.



In my family we don't have any birthdays until August
but, we do have an 8th grade graduation in 2 weeks.
My daughter Michaela will be off to High School next
year and I decided to make a special box for her gift.
I can't say what she will be getting because she reads
my blog but, trust me she is going to love it. 


To make this box I cut out 2 circles at 3 inches and 
2 circles out at 3 1/4 inches. The sides are 2 strips of
3 x 12 inch paper that I scored at 1 inch. After you 
fold the scored side up cut slits about 1/4 inch wide 
in the 1 inch section. Then take one of the circle and
add your favorite adhesive to the out side of the circle.
Roll up the strips to make them more flexible. The 
strips are then added to the outside of the circle until 
it meets the other end. Glue the other circle inside the
to hide the slits.  Now repeat for the other sided of the
box. For the top I cut a 5 inch square and glued it to
the 3 1/4 inch circle.  The numbers are cut at 1 1/2 
inches. I decided that they were to simple so, I decided
to add some super fine glitter.  Now I know why I never
use glitter.  It is EVERY WHERE. But, I do have to 
say it does look pretty. I then pop dotted the numbers 
for lift. I made a simple tassel with embody floss. 


I hope you enjoyed seeing my Graduation box for 
todays hop. Now please head on over to our Guest
Designer Candace to see the wonderful project 
she has made for todays hop. 

Here is the hop line up in case you get lost along the way:

(Guest Designer) Kim- www.rickettscricuts.blogspot.com
(Guest Designer) Candace ~ http://papercraftsbycandace.blogspot.com/
(Guest Designer) Jamie ~ http://jamiek711designs.blogspot.com/



Sweet Wishes ~ Sharon ~

Wednesday, May 9, 2012

Winner of the May 100 Cartridge Blog Hop!!!
I would like to announce that Kris is the winner
of the Blog Hop Blog Candy!!


Kris Said~
Beautiful project! Thank you for the instructions -- I have been wanting to try this but wasn't sure how to do it.

I will be getting you "Candy" in the mail in the next few days.

Sweet Wishes ~ Sharon ~

Monday, May 7, 2012


Welcome to My Cricut Craft room's Card Creating
Tuesday.  For today's post I decided to use the sketch
of the day. 



I have had this idea for a baby card for a while now
and just hadn't had a reason to make it.  Well I think
it fits in this card sketch perfectly.  Too bad I don't
know anyone having a baby. 


This is a very simple card made with a 4 x 6 1/2 card
base.  I added a light green front and a light yellow
for the inside to give it a little color.  The white was to
boring.  The little onesies are cut from the New Arrival
Cricut Cartridge at 1 1/2 inches.  I cut them out twice 
and added pop dots to the center to give them some depth.
I found the small clothes pins at Craft Warehouse along
with the light green twine. I found the "so happy for you" 
stamp in a bin at Craft Warehouse for a dollar. 

I hope you loved my simple baby card for today. Thank
 you for stopping by and I hope you will come back soon.


Sweet Wishes ~Sharon~


Sunday, May 6, 2012

Welcome to My Cricut Craft Room's 100 Cricut
Cartridge Blog Hop Day 2 for May
You should of come from my DT sister Heather at:

If not please start at the beginning.


Don't forget to comment on all the blogs for a chance to win
the new Cricut Wild Card 2 Cartridge from My Cricut Craft Room. 
There are so many wonderful ideas on how you can use over 
100 different Cricut Cartridges.

For today I wanted to show you another fun TP album 
I made for my mom's craft night that I teach once a month.

One of the best tricks to get the TP rolls flat it to iron them.
For some reason when you put a hot iron on the TP roll it 
makes them the flattest I have ever worked with.  With this
trick you will never have to worry about them puckering.
For this TP album I used 7 different Cricut Cartridges.

Depending on the size of your TP rolls is what you will cut
your cover paper for plus 1/2 inch for over lay.  My book 
is 4 1/4 X 2 5/8 inches so, I cut my paper at 4 1/4 X 5 3/4 inches.
I used my Bind It All to punch the holes for the wire but, 
you could use a strong hole punch and ribbon to hold the
book together.  You can't tell in this picture but, I added
a flower and butterfly charm to the ribbon. 


For the front page I cut the flowers at 2, 1 1/2 & 1 inches.
The flowers were cut from Accent Essentials on page 55.
I have found that some of the Bling you can buy is to big
for small books like this but, if you cut them into smaller
pieces you can get them to go along way. 


Page 1 is a simple 2 1/2 inch rectangle from Fabulous Finds
on page 104. I added a triangle paper clip and very small Prima
flowers to the corners with a little bling to the center of the flowers.

The butterfly from Page 2 can be found on the April Showers Cricut
Solutions Cartridge.  It was cut at 1 & 1 1/4 inches. I used another 
section on Bling that I cut apart for the trail after the Butterfly. 


Page 3's butterfly can be found on page 30 of the Storybook 
Cricut Cartridge. I cut the butterfly out at 1 1/2 inches. I also
added a little bling to the corners for that extra sparkle.

The envelope on page 4 can be found on the Cindy Loo 
Cricut Cartridge on page 76.  I love this little envelope. 
When you cut it out you even get a little card that goes in
the envelope so you can write something special.  I cut this
envelope out at 3 1/2 inches.


Page 5 is the easiest page because I just cut a 3 1/4 X 2 inch
rectangle and added bling to all the corners.

For page 6 I thought I would go back to the flowers. These 
2 flowers were cut at 1 1/4 & 1 1/2 inches from the Plantin 
Schoolbook Cricut Cartridge. Here is some more of the green
bling that I cut up.  I love how it adds a trail to the flower.  I 
also added a light yellow brad to the center of the flower.


I love the shape of this oval on page 7.  I found it on the Storybook
Cricut Cartridge on page 49 and cut it at 3 inches. 

I wanted to leave Page 8 open for pictures, journaling or what 
ever you wanted to fill the page with.  I added 3 small pearls to 
each of the 3 corners and an enamel flower square to the last
corner. 


I love making (what I call) insert cards for the ends of the TP 
albums.  You can add pictures, journaling, gift cards just about
anything you would like to.  The cards are cut to fit the TP rolls. 
Mine were cut at 3 3/4 X 2 1/2 inches and the flowers on the ends
were cut using the Tags, Bags, Boxes & More Cricut Cartridge. 
I would have to say that the flowers would fall into the More section
of this Cartridge.  TBBM is one of my Favorite Carts!!  You can find
the flowers on page 107 but, to get them to match when you glue 
them to both sides of the insert you need to Flip one of the flowers.  
I had to add a little stickles to the petals that stuck out of the album 
for that extra sparkle on the ends. 

Now start saving those TP rolls and I hope you go make your own 
album. Because I would really love to see how your turn out.  I 
hope you enjoyed seeing my project for today. Please leave me some 
blog love about what you  though.  I love all types of comments 
especially if you think I should do something differently. And if 
you would like to follow me that would be wonderful.  Because
who doesn't like to have wonderful friends that follow them. 

I have a surprise Blog Candy giveaway.  The only requirements I 
have is I will need a way to get ahold of you so please leave me
an email address if you want to be entered.  I will choose the 
winner on Wednesday May 9th. So, be on the look out for 
your name!!  

For your next stop on todays Blog Hop Please go over to my 
DT sister Deirdre at:

Here is Day 2's Line up:



Sweet Wishes ~Sharon~

Saturday, April 7, 2012

Welcome to My Cricut Craft Room's 
Day 2 100 Cricut Cartridge Blog Hop

You should of started at:
if not please start at the beginning.

Be sure to visit Erica's Blog http://mycricutcraftroom.blogspot.com/
so you will know when she has contests, prizes, challenges, swaps, &
special online coupons. 


Erica is currently running a Scrapbook & Card challenge over on her
challenge blog. You can win a gift certificate to her webstore!

Don't forget to comment along the way on all of the blogs today
to be entered to win the Cricut cartridge that Erica is giving away.
Winners will be announced on her blog Tuesday.


A Very Special Thank You for this weekends Sponsor of our Blog Hop.
In honor of her Birthday The Queen is launching her new 
stamp line...

Each day we have one set of stamps to give away.  You can 
also purchase them in her store and enter to win the Silhoueete
Cameo that she is giving away. She has Action Wobbles, Royal 
Twine, and foam squares in her store.



To buy her stamps go to:

HTTP://WWW.THESCRAPBOOKINGQUEEN-ROYALSHOPPE.BLOGSPOT.COM/

Also Erica put lots of items on sale in Erica's Craft Room.
All Cricut Cartridges are $33.00 or less.  Copic Markers are
25% off.  For Erica's Sale go to:

For todays projects I wanted to make a Sweet Treat
for Easter.  My First project is from one of my favorite
cartridges Tags, Bags, Boxes & More. 


You can find the Triangle box on page 125. I wanted you
to be able to see the treats inside so, I cut it out with the 
window option on. The Triangle was cut with the fit to page 
option on. The carrot is 5 inches long and 3 inches wide. 
The green carrot top was cut out using the Accent Essentials
cartridge flower on page 41. I cut them out at 2", 2 1/2" & 3"
I added a little green Bling to the center of the green top and
I think the Orange Bling gives the carrot a little sometime 
extra to make it sparkle. 

For my second project I made a Easter Card using 4 
different cartridges.


The card base was cut using page 71 from Cindy Loo.
I cut it out at 5". The back ground was cut from the 
George and Basic Shapes cartridge at 4 1/2". I also
cut a light purple circle to go in the inside of the card.
The circle is fond on page 108. The Bunny is from the 
Create a Critter cartridge on page 26 and she was cut 
at 3".  I love how many layers she had to give her lots
of depth.  I pop dotted her to give her some lift off the 
card.  The grass is from the Paper Doll Dress up cartridge.
 I found the grass on page 78 and cut it 2 different times
at 5", 4" & 3". I chalked the edges of the grass to give it 
extra depth. "Here comes the Easter Bunny" stamp is an
old Studio G stamp I had and thought it fit the card.

Here is one last look at my two projects for today.
I hope you see that you can use Cricut cartridges 
for other projects than what they were intended for.

I hope you loved my Easter projects for todays Blog
Hop!!  Now please head on over to my Design Team 
Sister Doris to see the wonderful project she has made
for today's hop.

Here is the Day 2 Blog Hop line up:


1. Start My Cricut Craft Room http://mycricutcraftroom.blogspot.com
10. Ericas’ Project http://ericasprojects.blogspot.com
24. Erica’s Blog candy http://ericasblogcandy.blogspot.com


Sweet Wishes~Sharon